Agostini Rearset Kit, Black Anodized, For V7 III's

Previous productBitubo Twinshock Set for V7...

Next productOEM Moto Guzzi Exhaust Flan...

Agostini Rearset Kit, Black Anodized, For V7 Racer III. Can also be fitted to V7 Stone III, and V7 Special III. BUT aftermarket exhausts without heat shields must be fitted.

Availability: Expected to arrive at our warehouse in late June if ordered today

SKU: AMV7IIIFRB

$459.99 (USD)

Qty:

Agostini Rearset Kit, Black Anodized

For V7 Racer III.

*Can also be fitted to other V7 III's, but aftermarket exhausts without heat shields must be fitted. This is because the Racer has more upswept exhaust pipes.

This Italian made rearset kit features the same peg position as found stock on the V7 Racer III, but is anodized and offers 1 inch of peg height/depth adjustment thanks to a slotted mounting hole.

Installation instructions are not provided, but the rearsets install in the same manner as stock. Detail photos below should provide additional installation assistance.

Use of Medium Strength Threadlock Compound is mandatory.

Please note that the installation of this rearset kit requires replacement of the shift pedal layshaft, seen in the center of the photo below.

*Please note: Rear Brake Pedal Pushrod Adjustmet should be reset anytime rearsets are fitted. This .pdf excerpt from the Aprilia Service Manual explains the process (Mille shown, all models use same values).

Does not fit V7 III's: Rear brake master cylidner is different, rear brake line is different, rearset bolt position is different, et cetera.

Products specifications