Power Commander Shift Sensor Push Type for PC5

Previous productPIAA H11 Xtreme Headlight B...

Next productReplacement Push In Bulb - ...

Power Commander Shift Sensor (Push Type) for Power Commander 5

Availability: Expected to arrive at our warehouse in late May if ordered today

SKU: PU16010247

$356.66 (USD)

Qty:

Power Commander Shift Sensor (Push Type) Linear for Power Commander 5

For Use with Power Commander 5 only.

Dynojet's Quick Shifter (DQS) kit allows full-throttle, clutchless upshifts in racing and performance riding applications

The shift rod pressure/tension sensor kit is a universal sensor that mounts to the shift rod in either a push or pull configuration

Requires modification of gear-linkage tie-rod (customizing, machining and fabrication-professional installation required).

The linear travel sensor kit works with bikes that have no shift rod, or on those the shift rod sensor will not fit

Mount one end to the shift lever and the other to a fixed point on the chassis.

Plugs directly into the Power Commander expansion port with no re-wiring required.

NOTE: You must find the correct direction of movement during an upshift (push or pull). For the shift rod/pressure/tension sensor, press on the shift lever in the direction of an upshift to see if the rod is pushing or pulling on the clevis on the shift shaft. For the linear travel sensor, also move the shifter for an upshift. If movement is down, a pull sensor is needed. If movement is up, a push sensor is required.