Titanium Oil Cooler and Radiator Guard Set
Complete fitment list at bottom of this page
Frames for these guards are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded TITANIUM.
Hard anodized for a chip-free, tough finish.
Includes installation kit and instruction sheet.
Manufactured by Cox Racing Group.
*Please note: If fitting to 2017-2020 RSV4 or Tuono V4 models, the radiator guard fits best when installed under the black plastic ducting.
**While not necessary, we've found it's easier to install the bottom of the radiator guard if you use the longer AP8152302 M5x12 Button Head Bolts.
***'21 and later RSV4 1100 owners, please note: Removing the mid fairings to install these guards is mandatory on your bike. Removing the '21 spec side fairnigs and bellypan is significantly more involved than on any previous Aprilia sportbike. This .pdf format excerpt from the factory service manual shows side fairing and bellypan removal.